Sealmaster 2-15/16"-ID 4-B TRB PILLOW BLOCKS SEA RPB-215-4
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288481539
-
Manufacturer Part Number550873
-
CountryUSA
-
Load Capacity9630 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed1750 rpm
-
TypeStandard-Duty
-
Mounting TypeFour-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width3-3/4 in
-
Base to Bore Centerline3-1/8 in
-
Bolt Center-to-Center Length8-3/4 to 10 in
-
Bore Diameter2-15/16 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height6-3/8 in
-
Overall Length11-3/4 in
-
Overall Width4-1/2 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 4-bolt split cast iron housing
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 4-bolt split cast iron housing
-
Alternative Part NumberRPB-215-4
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 2-15/16"-ID 4-B TRB PILLOW BLOCKS SEA RPB-215-4
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Save time and keep your tie wire organized with the Klein Tools tie wire reel. This reel is made of lightweight aluminum and can be used either left- or right-handed.
BBI 898452 Wood Screw, #12, 3-1/2 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
FHP V-BELT (3-L-140) OUTSIDE CIRCUMFERENCE 14."-GAT1140 >
Lasco® 429-251 Reducing Coupling, Coupling, 2 x 1-1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® 429-251 Reducing Coupling, 2 x 1-1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
HCI Preferred Supplier 18184 Tube-to-Pipe Adapter, 5/16 x 1/4 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18184 Tube-to-Pipe Adapter, 5/16 x 1/4 in, Compression x MNPTF, Brass
