Dodge® 070368 Type S2000 Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 7.94 to 8.31 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10.44 in OAL x 6.44 in OAH
Dodge® 070368 Type S2000 Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 7.94 to 8.31 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10.44 in OAL x 6.44 in OAH
-
BrandDodge®
-
UPC782475305988
-
Manufacturer Part Number070368
-
CountryUSA
-
Load Capacity41500 lb Dynamic/53000 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1490 rpm
-
TypeType S2000
-
Mounting TypeFour-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width3-3/4 in
-
Base to Bore Centerline3-1/4 in
-
Bolt Center-to-Center Length7.94 to 8.31 in
-
Bore Diameter2-15/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height6.44 in
-
Overall Length10.44 in
-
Overall Width3.59 in
- High-capacity double row spherical rollers
- Permits static or dynamic misalignment up to +/- 1 deg
- Factory sealed, lubed, and adjusted
- Expansion capability up to 3/8 in
- Flinger to shield seal and bearing from contamination/damage
- Larger rollers
- More contact area
- Case-carburized inner rings resist cracking
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100940984 |
| Motion Industries | 07547567 |
-
Alternative Part NumberP4B-S2-215R
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Line Drawing
-
Warranty Information
Recently Viewed
Dodge® 070368 Type S2000 Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 7.94 to 8.31 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10.44 in OAL x 6.44 in OAH
Dodge® 070368 Type S2000 Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 7.94 to 8.31 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10.44 in OAL x 6.44 in OAH
OIL FILTER-WIX51420>
Milwaukee® 2960-22 M18™ FUEL™ Cordless Variable Mid-Torque Impact Wrench, 3/8 in, 600 in-lb Torque, 18 V, 6 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. This kit includes (1) M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Contractor Bag.
OIL FILTER-WIX51437>
OIL FILTER-WIX51435>
OIL FILTER-WIX51449>
