Pillow Block Housings
Dodge® 042137 526 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 6 in Base to Bore Centerline, 18.38 in OAL x 11.69 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Dodge® 042129 520 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 4-1/2 in Base to Bore Centerline, 15-1/4 in OAL x 8-3/4 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Dodge® 042106 515 Both Ends Open Split Type SAF-XT Pillow Block Housing, Two-Bolt Base Mount, 3-1/4 in Base to Bore Centerline, 11-1/4 in OAL 6.44 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 2-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Recently Viewed
Proto® TorquePlus™ J07532M Standard Length Socket, Metric, 3/4 in Square Drive, 32 mm
A GALVANIZED HARD DRAWN COMPRESSION SPRING WITH AN OUTSIDE DIAMETER OF 0.687" AND AN OVERALL LENGTH OF 1.500"
-AJA39 >
FULL BODY HIGH BAY CURVED FIXTURE WITH MIRRORED REFLECTOR
USES SIX T-5 48" BULBS (NOT INCLUDED)
USES ONE 4-BULB & ONE 2-BULB MULTI-VOLT BALLAST
Proto® TorquePlus™ J5550M Standard Length Socket, Metric, 3/4 in Square Drive, 50 mm
1/2 STRAIGHT CUT ROUTER BIT-POR43318>
Dixon® 300PRSCCS Pull Ring Safety Clip, Suitable For Use With 3 and 4 in Boss-Lock™ Cam and Grooved Coupling, Carbon Steel, Domestic
Dixon® 300PRSCCS Pull Ring Safety Clip, Suitable For Use With 3 and 4 in Boss-Lock™ Cam and Grooved Coupling, Carbon Steel, Domestic
