W-1-7/8 1-7/8"-ID Thrust
1-7/8"-ID THRUST BALL BEARING-INAW17/8>
Recently Viewed
W-1-7/8 1-7/8"-ID Thrust
1-7/8"-ID THRUST BALL BEARING-INAW17/8>
This 15 A, 6000 rpm, 3.5 maximum horsepower sander provides high performance under severe applications. As a sander, this tool can be used with a 7 or 9 in backing pad for removing paint or rust from metal, plastic or fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. Sold as a sander, this tool can be converted to a grinder by purchasing a 7 or a 9 in guard which is easily attached to the tool. Grinding applications remove more material and may be used to shape metal.
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Browning® 767612 VTBS 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 3 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 4 in OAL x 3-3/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 V AC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 VAC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
HCI Preferred Supplier 17126N 90 deg Union Elbow, 3/8 in Nominal, Compression End Style, Nylon
HCI Preferred Supplier 17126N 90 deg Union Elbow, 3/8 in Nominal, Compression End Style, Nylon
