Dodge® 126823 218 Medium Duty Pillow Block Ball Bearing Unit, 3-7/16 in Dia Bore, 10.32 to 11.62 in L Bolt Center-to-Center, 4 in Base to Bore Centerline, 14 in OAL x 8 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475116416
-
Manufacturer Part Number126823
-
CountryUSA
-
Load Capacity21451 lb Dynamic/16641 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed2000 rpm
-
TypeMedium Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series218
-
Base Width3.38 in
-
Base to Bore Centerline4 in
-
Bolt Center-to-Center Length10.32 to 11.62 in
-
Bore Diameter3-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height8 in
-
Overall Length14 in
-
Overall Width2.56 in
- Medium duty wide inner ring
- Stronger and more flexible cage
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00559940 |
| Motion Industries | 00559940 |
-
Alternative Part NumberP2B-SCM-307
-
UNSPSC31171504
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Owners/User Manual
-
Catalog
Recently Viewed
Dodge® 126823 218 Medium Duty Pillow Block Ball Bearing Unit, 3-7/16 in Dia Bore, 10.32 to 11.62 in L Bolt Center-to-Center, 4 in Base to Bore Centerline, 14 in OAL x 8 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
Sealmaster® 700409 SEHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit, 2 in Dia Bore, 4-3/8 in OD, 2-1/32 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
8-MM X 1.25X10-MM STAINLESS STEEL CAPSCREW-MET93308010SS >
Crosby® 1016439 G-403 Jaw End Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.06 in x 1.25 in, 0.63 in Eye
Crosby® 1016439 G-403 Jaw End Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.06 in x 1.25 in, 0.63 in Eye
