Dodge® 123580 204 Intermediate Duty Value Line Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 3.38 to 4.19 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 5-1/4 in OAL x 2.56 in OAH
Dodge® 123580 204 Intermediate Duty Value Line Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 3.38 to 4.19 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 5-1/4 in OAL x 2.56 in OAH
-
BrandDodge®
-
UPC782475412204
-
Manufacturer Part Number123580
-
CountryUSA
-
Load Capacity2899 lb Dynamic/1482 lb Static
-
Locking DeviceSet Screw
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed7500 rpm
-
TypeIntermediate Duty Value Line
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series204
-
Base Width1.34 in
-
Base to Bore Centerline1.31 in
-
Bolt Center-to-Center Length3.38 to 4.19 in
-
Bore Diameter3/4 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height2.56 in
-
Overall Length5-1/4 in
-
Overall Width1.23 in
- 65 deg set screw locking system
- Wide inner ring design
- Fiberglass reinforced nylon cage
- Grade 10 balls for quiet operation
- Proguard™ single lip seal
- No groove in housing for end cover
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100939832 |
| Motion Industries | 00590667 |
-
Alternative Part NumberP2B-VSC-012
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
-
Owners/User Manual
-
Warranty Information
Recently Viewed
Dodge® 123580 204 Intermediate Duty Value Line Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 3.38 to 4.19 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 5-1/4 in OAL x 2.56 in OAH
Dodge® 123580 204 Intermediate Duty Value Line Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 3.38 to 4.19 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 5-1/4 in OAL x 2.56 in OAH
HCI Preferred Supplier 28222 Hex Reducer Nipple, 3/8 x 1/4 in Nominal, 1.41 in L, Brass, MNPT End Style
Brass fittings are popular because they are strong and durable and hence widely used in industrial and residential applications. The use of brass to make various fittings provides a distinct look because of its yellow color. The advantages of brass for fittings include its good corrosive resistance and also its plating, joining, polishing and finishing characteristics. Brass as a material is easily machined and hence can be given any shapes of the various types of fittings available.
Precision Brand® 16AA20 Shim Stock, 1008-1010 Full Hard Steel, 120 in Roll L x 12 in W x 0.002 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Precision Brand® 16A1 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.001 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
1-GAL RUS-KIL GRAY PRIMER PAINT-BLP109GAL >
HCI Preferred Supplier 40004 Standard Pipe Nipple, 1/8 in Nominal, 2-1/2 in L, Brass, NPT End Style
HCI Preferred Supplier 40004 Standard Pipe Nipple, 1/8 in Nominal, 2-1/2 in L, Brass, NPT End Style
