Browning 2-3/16" 2-B LOW BB PILLOW BLOCKS BRW VPLS-135
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289318896
-
Manufacturer Part Number767970
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating200 to 250 deg F
-
FinishGray Painted
-
MaterialCast Iron
-
Maximum Speed1750 rpm
-
TypeIntermediate Duty Low Base
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
SeriesVPLS 100
-
Base Width2-5/16 in
-
Base to Bore Centerline2-7/16 in
-
Bolt Center-to-Center Length6-7/16 to 7-7/16 in
-
Bore Diameter2-3/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-29/32 in
-
Overall Length8-13/16 in
- A positive-contact molded nitrile rubber contact seal with an auxiliary flinger element comes standard
- An anti-rotation rivet prevents outer ring creep or rotation within the housing
- Semi solid cast iron rugged base design provides an excellent mounting foundation
- Zone hardened inner race
- Setscrew locking is 120 deg spaced, balanced three-point contact minimizes inner ring distortion vibration while reducing noise and improving reliability
- Nylon retainer
- 52100 steel insert
- Alemite fitting lubrication
-
Alternative Part NumberVPLS-135
-
UNSPSC31171505
-
Package Description1/PK
-
Standards/ApprovalsABMA Standard
-
Warranty1 Year
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
MCR Safety ST1150 Storm® Plus Single Lens Safety Glasses, Duramass® Hard Coat, Green Filter 5.0 Lens, Half-Frame Frame, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CE EN 166, CAN/CSA Z94.3
ST1 Series Safety Glasses with Ratcheting Temples Soft Non-Slip Temple Grips Single wraparound dual focal point lens 5 position adjustable ratcheting temples for better fit Workers wearing the ST1 eyewear can expect extreme comfort with this face-flattering protective eyewear from MCR Safety. Ratchet action temples combined with non-slip rubber head grips create a customized fit for virtually any head size. The wraparound lens is constructed of lightweight, scratch-resistant polycarbonate that filters 99.9% of UV rays and delivers advanced visual acuity and protection. This product meets the ANSI/ISEA Z87.1-2025 standard.
Browning® 3748621 Taper Lock Bushing, 13/16 in Dia Bore, 1-7/8 in Dia Barrel, 1 in OAL, Steel
Sioux Chief TKO™ 887-PM 1-Piece Open Closet Flange With Stainless Steel Swivel Ring, PVC
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
Morse® 216128 MHSG Hole Saw, 3/4 in Dia, 1-15/16 in D Cutting, Tungsten Carbide Cutting Edge, 1/2-20 Arbor
Long lasting choice for very hard abrasive materials. These hole saws create clean holes in materials too hard or abrasive for standard bi-metal saws or so thin they would strip bi-metal or chip carbide teeth.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
