P-2-BSCMED-203 Dodge® 076133 212 Extreme Medium Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5.4 in OAH
The Dodge® SC/SCMED extreme duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge®-only features such as the QuadGuard™ sealing system and the Maxlife™ ball cage, the Dodge® SCED/SCMED bearing outperforms the competition in demanding environments where increasing equipment uptime is critical to success. Extreme conditions require highly-engineered products that will last. The Dodge® extreme duty ball bearing is up to the challenge.
-
BrandDodge®
-
UPC782476477684
-
Manufacturer Part Number076133
-
CountryUSA
-
Load Capacity11791 lb Dynamic/8100 lb Static
-
Locking DeviceSet Screw
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed2750 rpm
-
TypeExtreme Medium Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTriple Lip
-
Series212
-
Base Width2.37 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.88 to 7.94 in
-
Bore Diameter2-3/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.4 in
-
Overall Length9-1/2 in
-
Overall Width2.37 in
- The Dodge extreme duty ball bearing incorporates 65 deg setscrews that provide maximum locking force without compromising the strength of the inner ring
- The design also includes an anti-rotation pin that prevents the insert from rotating in the housing under load which causes premature failure
- Rubberized flinger
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 110018932 |
-
Alternative Part NumberP2B-SCMED-203
-
UNSPSC31171504
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
P-2-BSCMED-203 Dodge® 076133 212 Extreme Medium Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5.4 in OAH
The Dodge® SC/SCMED extreme duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge®-only features such as the QuadGuard™ sealing system and the Maxlife™ ball cage, the Dodge® SCED/SCMED bearing outperforms the competition in demanding environments where increasing equipment uptime is critical to success. Extreme conditions require highly-engineered products that will last. The Dodge® extreme duty ball bearing is up to the challenge.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
200-W 130-VOLT INSIDE FROST BULBS-BUL200A23 >
Milwaukee® 22-20-0691 Left Brush Holder, For Use With 6880 Serial 630B 10 AWG, 6890-2 Serial 734A 16 AWG Nibbler
48 TOOTH 8-MM-PITCH SD-STYLE TIMING BELT SHEAVE - IDCP488M50SD>
1-QT RUSKIL SAFETY ORANGE PAINT-BLP1061QT>
