Dodge® 123867 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475114139
-
Manufacturer Part Number123867
-
CountryUSA
-
Load Capacity5759 lb Dynamic/3461 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed5500 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series207
-
Base Width1-3/4 in
-
Base to Bore Centerline1.81 in
-
Bolt Center-to-Center Length4.68 to 5.44 in
-
Bore Diameter1-3/8 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3.69 in
-
Overall Length6-1/2 in
-
Overall Width1.71 in
- Normal duty wide inner ring
- Stronger and more flexible cage
- Low backing height pillow block
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100733435 |
| Motion Industries | 00558842 |
-
Alternative Part NumberP2B-SCB-106
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Warranty Information
-
Catalog
-
Owners/User Manual
-
Specification Sheet
-
Full Engineering Drawing
Recently Viewed
Dodge® 123867 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
Precision Brand® 16A9 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.009 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
1-GAL OIL ROYAL BLUE ENAMEL PAINT-BLP3037GAL >
Dodge® 131809 207 Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
Gates® Power Transmission Polyflex® 7M1120 Light Duty V-Belt, 7M Section, 9/32 in W Top, 44.09 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Dodge® 131839 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
