Dodge® 123809 206 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1-5/8 in Base to Bore Centerline, 6-1/4 in OAL x 3-1/4 in OAH
Dodge® 123809 206 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1-5/8 in Base to Bore Centerline, 6-1/4 in OAL x 3-1/4 in OAH
-
BrandDodge®
-
UPC782475113873
-
Manufacturer Part Number123809
-
CountryUSA
-
Load Capacity4368 lb Dynamic/2538 lb Static
-
Locking DeviceSet Screw
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed6500 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series206
-
Base Width1-3/4 in
-
Base to Bore Centerline1-5/8 in
-
Bolt Center-to-Center Length4-1/4 to 5 in
-
Bore Diameter1-3/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3-1/4 in
-
Overall Length6-1/4 in
-
Overall Width1.52 in
- Normal duty wide inner ring
- Stronger and more flexible cage
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100000066 |
| Motion Industries | 00557146 |
-
Alternative Part NumberP2B-SC-103
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Full Engineering Drawing
-
Warranty Information
Recently Viewed
Dodge® 123809 206 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1-5/8 in Base to Bore Centerline, 6-1/4 in OAL x 3-1/4 in OAH
Dodge® 123809 206 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1-5/8 in Base to Bore Centerline, 6-1/4 in OAL x 3-1/4 in OAH
1-1/4" X 1-1/4" X 1/2" GALVANIZED TEE-FIT11/4X11/4X1/2GT >
DeWALT® 7426SD1 SD1 Expansion Wedge Anchor, 1/2 in Dia, 7 in OAL, 5-1/4 in L Thread, Carbon Steel, Zinc Plated
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
FYH® UCF211 32 UCF Cylindrical Flange Mount Ball Bearing Unit, 2 in Dia Bore
FYH® UCF211 32 UCF Cylindrical Flange Mount Ball Bearing Unit, 2 in Dia Bore
Precision Brand® 16A15 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.015 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
FYH® UCFL201-8 2-Bolt Cylindrical Bore Normal Duty Oval Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 3-35/64 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
FYH® UCFL201-8 2-Bolt Cylindrical Bore Normal Duty Oval Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 3-35/64 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
