Dodge® 131841 208 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475119509
-
Manufacturer Part Number131841
-
CountryUSA
-
Load Capacity7332 lb Dynamic/4475 lb Static
-
Locking DeviceEccentric Collar
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed5000 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series208
-
Base Width1.93 in
-
Base to Bore Centerline1.94 in
-
Bolt Center-to-Center Length5.18 to 5.88 in
-
Bore Diameter1-1/2 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4 in
-
Overall Length7-1/4 in
-
Overall Width2.12 in
- Precision-hardened inner ring
- Normal duty wide inner ring
- Dodge® dual guard land-riding, positive contact seal
- Stronger and flexible ball cage
- Simplified anti-rotation device
- Low backing height pillow block
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100940015 |
| Motion Industries | 00558297 |
-
Alternative Part NumberP2B-SXRB-108
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Instruction/Installation Manual
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Dodge® 131841 208 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
7" 50# NATURAL CABLE TIES--100 PER PACKAGE-JWH514651 >
Sealmaster® 700866 TB Series Standard-Duty Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 2 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 3-1/8 in OAL x 2-9/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® 700577 NPL Standard-Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4-11/16 to 5-5/16 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-9/16 in OAL x 3-11/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® 700984 SPM Medium Duty High Base Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 5-5/8 to 6-7/8 in L Bolt Center-to-Center, 2-3/8 in Base to Bore Centerline, 8-1/4 in OAL x 4-1/2 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
HCI Preferred Supplier 28493 Long Pipe Nipple, 1/2 in Nominal, 3-1/2 in L, Brass, NPTF End Style
HCI Preferred Supplier 40065 Standard Pipe Nipple, 1/2 in Nominal, 3-1/2 in L, Brass, NPT End Style
