FYH® UCP207-23 Pillow Block Unit, 1-7/16 in Dia Bore, 5 in L Bolt Center-to-Center
FYH® UCP207-23 Pillow Block Unit, 1-7/16 in Dia Bore, 5 in L Bolt Center-to-Center
-
BrandFYH®
-
UPC808250113132
-
Manufacturer Part NumberUCP207-23
-
CountryUSA
-
Load Capacity5783 lbf Dynamic/3465 lbf Static
-
Locking DeviceSet Screw
-
MaterialCast Iron
-
SeriesUCP
-
Bolt Center-to-Center Length5 in
-
Bore Diameter1-7/16 in
-
Bore TypeCylindrical
- P207 housing
- UC207-23 bearing
- Pillow block unit with a rigid cast iron housing and two specially designed set screws in the inner ring spaced at 120 deg for maximum holding power and reliability for a wide variety of applications and operating conditions
- 1/2 in bolt
- 6-9/16 in OAW
- 3-3/4 in OAH
- Basic Load Rating: 13.9 factor
- 1-7/8 in base depth
- 1-7/8 in center to base
- 5/16-24 UNF set screw size
- A-1/4-28 UNF grease fitting size
-
UNSPSC31171511
-
Catalog
Recently Viewed
FYH® UCP207-23 Pillow Block Unit, 1-7/16 in Dia Bore, 5 in L Bolt Center-to-Center
FYH® UCP207-23 Pillow Block Unit, 1-7/16 in Dia Bore, 5 in L Bolt Center-to-Center
2 STAINLESS STEEL BUTT WELD COUPLING
Gates® Power Transmission Poly Chain® GT®2 8MX-42S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.148 in OD, 42 Grooves, 4.211 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
40-RIB POLY-V V-BELT - JAS540J40>
Gates® Power Transmission Poly Chain® GT®2 8MX-32S-12 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.145 in OD, 32 Grooves, 3.208 in Dia Pitch, 1 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
United Abrasives-SAIT 1AX Quick Ship™ 60132 Semi-Friable Coated Abrasive Belt, 3/4 in W x 20-1/2 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
