FYH® NAP211 32 NAP Normal Duty Pillow Block Unit, 2 in Dia Bore, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL 4-29/32 in OAH
FYH® NAP211 32 NAP Normal Duty Pillow Block Unit, 2 in Dia Bore, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL 4-29/32 in OAH
-
BrandFYH®
-
Manufacturer Part NumberNAP211 32
-
CountryUSA
-
Load Capacity43.4 kN Dynamic/29.4 kN Static
-
Locking DeviceEccentric Collar
-
TypeNormal Duty
-
SeriesNAP
-
Base to Bore Centerline2-1/2 in
-
Bore Diameter2 in
-
Bore TypeCylindrical
-
Overall Height4-29/32 in
-
Overall Length8-5/8 in
-
Overall Width2-3/8 in
Recently Viewed
FYH® NAP211 32 NAP Normal Duty Pillow Block Unit, 2 in Dia Bore, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL 4-29/32 in OAH
FYH® NAP211 32 NAP Normal Duty Pillow Block Unit, 2 in Dia Bore, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL 4-29/32 in OAH
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Drillco 72A148C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
MINI-SANDING DISC, QUICK CHANGE, 2" X 80 GRIT.-FOR71745 >
2" 120-GRIT TYPE-P SANDING DISC-PDTMM5961048 >
MORSE® 59689 5970 Premium Carbide Burr, Ball Head, 3/16 in Dia Head, 5/32 in L of Cut, 1-21/32 in OAL, Double Cut
