Dodge® 131843 209 Normal Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
-
BrandDodge®
-
UPC782475119523
-
Manufacturer Part Number131843
-
CountryUSA
-
Load Capacity7891 lb Dynamic/4906 lb Static
-
Locking DeviceEccentric Collar
-
FinishPowder Coated
-
MaterialCast Iron
-
Maximum Speed5000 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series209
-
Base Width2 in
-
Base to Bore Centerline2.06 in
-
Bolt Center-to-Center Length5.5 to 6.19 in
-
Bore Diameter1-11/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.21 in
-
Overall Length7.44 in
-
Overall Width2.13 in
- Wide inner ring
- Precision hardened and honed
- DualGuard™ seal with rubberized flinger
- Stronger and flexible ball cage
- Simplified anti-rotation device
- Low backing height pillow block
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100940016 |
| Motion Industries | 00558334 |
-
Alternative Part NumberP2B-SXRB-111
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
-
Owners/User Manual
-
Catalog
Recently Viewed
Dodge® 131843 209 Normal Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
FYH® NAP206 19 NAP Normal Duty Pillow Block Unit, 1-3/16 in Dia Bore, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL 3-5/16 in OAH
FYH® NAP206 19 NAP Normal Duty Pillow Block Unit, 1-3/16 in Dia Bore, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL 3-5/16 in OAH
Sealmaster® 702151 SPD 1-Piece Standard Duty Pillow Block Ball Bearing, 2.938 in Dia Bore, 9-1/4 to 10-3/4 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7.188 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either set screw or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP™ grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions as illustrated.
Browning® Classical Gripbelt® 1042530 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-3/4 in OD, 6.2 in (A)/6.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042530 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-3/4 in OD, 6.2 in (A)/6.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042555 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 7-1/4 in OD, 6.7 in (A)/7.2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042555 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 7-1/4 in OD, 6.7 in (A)/7.2 in (B) Dia Pitch, 7/8 in W Face
DENIM CUFF LEATHER PALM GLOVES-GREWA6710B >
