Browning® 767745 VPLS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-5/32 to 5-3/32 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-3/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
-
BrandBrowning®
-
UPC662289524655
-
Manufacturer Part Number767745
-
CountryUSA
-
Load Capacity5782 lb Dynamic/3493 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating-20 to 200 deg F
-
FinishGray Painted
-
MaterialCast Iron
-
Maximum Speed3000 rpm
-
TypeIntermediate Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
SeriesVPLS 100
-
Base Width1-3/4 in
-
Base to Bore Centerline1-9/16 in
-
Bolt Center-to-Center Length4-5/32 to 5-3/32 in
-
Bore Diameter1-1/4 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3-5/32 in
-
Overall Length6-3/16 in
- Powder coat epoxy cast iron housing
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Positive contact molded nitrile rubber contact seal
- An anti-rotation rivet prevents outer ring creep or rotation, within the housing
- Spherical outer diameter bearing insert
- 52100 steel insert
- Alemite fitting lubrication
- Nylon retainer
- Powder coat epoxy cast iron housing_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal
-
Alternative Part NumberVPLS-120S
-
UNSPSC31171515
-
Package DescriptionEACH
-
Standards/ApprovalsANSI/ABMA STD 9
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 767745 VPLS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-5/32 to 5-3/32 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-3/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
HCI Preferred Supplier 40081 Standard Pipe Nipple, 3/4 in Nominal, 1-1/2 in L, Brass, NPT End Style
HCI Preferred Supplier 40081 Standard Pipe Nipple, 3/4 in Nominal, 1-1/2 in L, Brass, NPT End Style
Dodge® 370115 First Stage Pinion Gear, 49 Diametral Pitch, 74 Teeth, 1 in Dia Pitch
Dodge® 370115 First Stage Pinion Gear, 49 Diametral Pitch, 74 Teeth, 1 in Dia Pitch
3734XL 3734 High Performance Cut Resistant Gloves, XL, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
3734XL 3734 High Performance Cut Resistant Gloves, XL, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
Dodge® 093416QC Flex Module, For Use With Size 68 3.5, 6.1 A QC Coupling
Dodge® 093416QC Flex Module, For Use With Size 68 3.5, 6.1 A QC Coupling
Southwire® Ultratite® 55094401 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1 in Trade, 1.041 to 1.066 in ID x 1.303 in OD, 100 ft Coil L, PVC
The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.
