Sealmaster® 700007 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 5/8 in Dia Bore, 1.8504 in OD, 1-7/32 in W, 2611 lb Dynamic/1444 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000052
-
Manufacturer Part Number700007
-
CountryUSA
-
Load Capacity2611 lb Dynamic/1444 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed7300 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width1-7/32 in
-
Bearing MaterialSteel
-
Outside Diameter1.8504 in
-
Bore Diameter5/8 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-010
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® 700007 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 5/8 in Dia Bore, 1.8504 in OD, 1-7/32 in W, 2611 lb Dynamic/1444 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
ISOSTATIC™ Oilube® 401111 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 3/8 in W
ISOSTATIC™ Oilube® 401111 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 3/8 in W
ITM C63NC0004 Plug Tap, 4-40 NC Thread, H2 Thread Limit
3/4" X 30' SPLICING TAPES-MMM233/4X30 >
Milwaukee® 48-58-0030 Low Kick Back Chain, 16 in L, 3/8 in Pitch, Alloy Steel
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee via their website.
Irwin® Vise-Grip® The Original™ 20 11SP® Fixed Tip Standard Locking C-Clamp With Swivel Pad, Nickel Plated, 2-5/8 in D Throat, 3-3/8 in Jaw Opening, 11 in L Jaw, Heat Treated Alloy Steel
The IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads, features wide opening jaws for more versatility and the ability to clamp a variety of small items with just one tool. Pressure and fit can be adjusted with the turn screw that stays adjusted for repetitive use. Constructed of high-grade, heat-treated alloy steel for maximum toughness and durability, these small C-Clamps have the classic trigger release design that maintains maximum locking force where you need it. Backed by the IRWIN Lifetime Guarantee.
