Sealmaster® 700097 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 3-7/16 in Dia Bore, 6.2992 in OD, 3-25/32 in W, 21566 lb Dynamic/16301 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000878
-
Manufacturer Part Number700097
-
CountryUSA
-
Load Capacity21566 lb Dynamic/16301 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2000 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width3-25/32 in
-
Bearing MaterialSteel
-
Outside Diameter6.2992 in
-
Bore Diameter3-7/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-37
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® 700097 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 3-7/16 in Dia Bore, 6.2992 in OD, 3-25/32 in W, 21566 lb Dynamic/16301 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Gardner Bender HST-500 Heat Shrink Tubing, 1/2 in ID Expanded, 1/4 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 1/2 in heat shrink tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
96" COLOR RIGHT FLUORESCENT BULBS-BULF96T12C50>
COOL WHITE SAFE SHIELD FLUORESCENT BULBS. 24" LONG, 1-1/2" DIAMETER, 20-WATT, 2 PINS ON EACH END
ISOSTATIC™ Oilube® 401456 Round Bore Sleeve Bearing, 1-7/16 in Dia Bore, 1-3/4 in OD, 2-1/2 in W
ISOSTATIC™ Oilube® 401456 Round Bore Sleeve Bearing, 1-7/16 in Dia Bore, 1-3/4 in OD, 2-1/2 in W
Chicago Hardware 50008 1 2 Series Round Bend U-Bolt, 1/4-20, 1-1/4 in L Inside x 3/4 in W Inside, Low Carbon Steel, Zinc Plated
