Sealmaster 3-15/16"-ID SPH/OD INSERT BEARINGS SEA 3-315
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000885
-
Manufacturer Part Number700100
-
CountryUSA
-
Load Capacity29905 lb Dynamic/23553 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed1700 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width4-5/8 in
-
Bearing MaterialSteel
-
Outside Diameter7.4803 in
-
Bore Diameter3-15/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-315
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
ITM C67NC0320 Bottom Tap, 7/16 in-14 NC Thread, H3 Thread Limit
Browning® Gearbelt® 1055383 Type 2 Synchronous Timing Pulley With Flange, 5/8 to 2-5/16 in Bore, 4.267 in OD, 36 Grooves, 4.297 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
DOUBLE SHIELDED BALL BEARING-GEN2150577>
BK-067-3/4 1-groove A Or B-belt 3/4"-ID Sheave
1-GROOVE A OR B-BELT 3/4"-ID SHEAVE - IDCBK0673/4>
BBI 581635 1960 Semi-Standard Round Socket Cap Screw, 1/2-20, 4-3/4 in OAL, Alloy Steel, 3A Grade
BBI 581635 1960 Semi-Standard Round Socket Cap Screw, 1/2-20, 4-3/4 in OAL, Alloy Steel, 3A Grade
