Sealmaster 2-7/16"-ID SPH/OD INSERT BEARINGS SEA 3-27
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000762
-
Manufacturer Part Number700085
-
CountryUSA
-
Load Capacity13971 lb Dynamic/10063 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width2-3/4 in
-
Bearing MaterialSteel
-
Outside Diameter4.9213 in
-
Bore Diameter2-7/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-27
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
1-1/4" -FEMALE PIPE THREAD METAL GALVANIZED UNIONS
MORSE® 43682 1898 Center Cutting Regular Length Single End End Mill, 1-1/4 in Dia Cutter, 1-5/8 in Length of Cut, 2 Flutes, 1 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 29862 1655H Chucking Reamer, 0.6865 in Dia, 9 in OAL, 0.5615 in Straight Shank, Straight Flute
12-TOOTH FINISHED-BORE SPROCKETS FOR #50 CHAIN
Loctite® 135374 262™ High Strength Medium Viscosity Permanent Threadlocker, 50 mL Bottle, Liquid Form, Red
Loctite® 135374 262™ High Strength Medium Viscosity Permanent Threadlocker, 50 mL Bottle, Liquid Form, Red
