Sealmaster® 700044 Non-Expansion Standard-Duty Straight Bore Ball Bearing Insert, 2-7/16 in Dia Bore, 4.3307 in OD, 2-9/16 in W, 11789 lb Dynamic/8150 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000427
-
Manufacturer Part Number700044
-
CountryUSA
-
Load Capacity11789 lb Dynamic/8150 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard-Duty Straight Bore
-
Seal MaterialFelt
-
Width2-9/16 in
-
Bearing MaterialSteel
-
Outside Diameter4.3307 in
-
Bore Diameter2-7/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-27
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® 700044 Non-Expansion Standard-Duty Straight Bore Ball Bearing Insert, 2-7/16 in Dia Bore, 4.3307 in OD, 2-9/16 in W, 11789 lb Dynamic/8150 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
3/4" X 5" SAE GR-5 Hex Head Capscrew
Dichtomatik N3.00X220 O-Ring, 220 mm ID x 226 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 101760 Round Bore Sleeve Bearing, 1-7/8 in Dia Bore, 2-1/4 in OD, 2-1/2 in W
ISOSTATIC™ Oilube® 101760 Round Bore Sleeve Bearing, 1-7/8 in Dia Bore, 2-1/4 in OD, 2-1/2 in W
1/4" X 5-1/2" USS Stainless Steel Hex Head Capscrew
RIDGID® 31350 2P Series Strap Wrench, 2 in Pipe, 5-1/2 in OD Tubing
