Browning® 765122 VS Series Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 2.438 in Dia Bore, 4.331 in OD, 2.563 in W, 13971 lb Dynamic/10063 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526499
-
Manufacturer Part Number765122
-
CountryUSA
-
Load Capacity13971 lb Dynamic/10063 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeStandard Duty Straight Bore
-
Width2.563 in
-
SeriesVS Series
-
Bearing MaterialSteel
-
Outside Diameter4.331 in
-
Bore Diameter2.438 in
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
- Browning bearing insert with lubrication hole and anti-rotation rivet_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal and flinger
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
-
Alternative Part NumberVS-239
-
UNSPSC31171504
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® 765122 VS Series Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 2.438 in Dia Bore, 4.331 in OD, 2.563 in W, 13971 lb Dynamic/10063 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
MORSE® 15588 1439 Drill Blank, 1/2 in Drill Blank, 6 in L, HSS
Dixon® HFN150NST Heavy Duty Industrial Fog Nozzle With Bumper, 1-1/2 in Inlet, Brass Body
Dixon® HFN150NST Heavy Duty Industrial Fog Nozzle With Bumper, 1-1/2 in Inlet, Brass Body
Wilton® 2901310 Perma Pad With Ring, For Use With Classic 404-SF, 412-SF, 4406, 4408 C-Clamp
Wilton® 2901310 Perma Pad With Ring, For Use With Classic 404-SF, 412-SF, 4406, 4408 C-Clamp
Sealmaster® 705665 EMP Medium Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 5-15/16 to 7-9/16 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 9-1/2 in OAL x 5-3/32 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Apollo™ 3003201 102T Non-Rising Stem Gate Valve, 3/8 in Nominal, NPT End Style, 125 lb, Bronze Body, Handwheel Actuator, Domestic
The Apollo™ Model 102T (30 Series) Gate Valve provides a cost effective Made in the USA alternative to globally sourced multi-turn valves. These valves are cast, machined, assembled, and tested in South Carolina. The Apollo™ gate valve is ideal for use in a wide variety of plumbing and heating applications including building service piping systems.
