Sealmaster 2-3/16"-ID SPH/OD INSERT BEARINGS SEA 3-23
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000731
-
Manufacturer Part Number700082
-
CountryUSA
-
Load Capacity11789 lb Dynamic/8150 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width2-9/16 in
-
Bearing MaterialSteel
-
Outside Diameter4.3307 in
-
Bore Diameter2-3/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-23
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
GE Q-Line® THQP130 Type THQP Compact Molded Case Circuit Breaker, 120/240 VAC, 30 A, 10 kA Interrupt, 1 Pole, Thermal Magnetic Trip
THQP breakers are a smaller, smarter solution for today cost and quality conscious contractors and homeowners. half the width of standard breakers, they allow use of smaller loadcenters and for maximum savings of space and money. GE is the only manufacturer that gives you this cost advantage without sacrificing flexibility. THQP breakers are one-half the width of standard GE breakers but identical in design. they are available from 15 to 50 A and in 1 and 2-pole construction.
The Classic Series Material is the most popular in the Industry. It combines the strength and waterproof qualities of PVC with the durability of a polyester backing. The 200J yellow jacket features a snap front, take up snaps at the wrists,detachable hood with drawstring, and 2 front patch pockets. Come back to the Classics for your protective wear needs.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Weiler® 10028 Stem Mount End Brush, 1-1/8 in Dia Brush, Knot, 0.02 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10028 Stem Mount End Brush, 1-1/8 in Dia Brush, Knot, 0.02 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
United Abrasives-SAIT 02703 End Brush, 3/4 in Dia Brush, Full Cable Twist Knot, 0.014 in Dia Filament/Wire, Carbon Steel Fill, 1-1/8 in L Trim
