Sealmaster 2-3/16"-ID SPH/OD INSERT BEARINGS SEA 2-23
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000366
-
Manufacturer Part Number700038
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3250 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width2-3/16 in
-
Bearing MaterialSteel
-
Outside Diameter3.937 in
-
Bore Diameter2-3/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-23
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Hillman™ 40060 Wood Screw, #8, 3/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
Hillman™ 40060 Wood Screw, #8, 3/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
Campbell® T7665042 Welded Ring, 0.24 in Wire, 1-1/2 in ID, 200 lb Load, Steel, Nickel Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
2-1/2" X 54" LOG TIMBER CARRIERS, HARWOOD HANDLE-DIX09051 >
5/16" X 36" SMOOTH SHAFT ROD-NTL179770 >
#10 (.190" )X3/8" SOCKET HEAD CAP SCREWS-HOL72070 >
