Browning® 767371 VE Series Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 2.188 in Dia Bore, 3.937 in OD, 2.813 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289519729
-
Manufacturer Part Number767371
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeStandard Duty Straight Bore
-
Width2.813 in
-
SeriesVE Series
-
Bearing MaterialSteel
-
Outside Diameter3.937 in
-
Bore Diameter2.188 in
- Eccentric locking device
- Contact seal
- Thru hardened inner race heat treat method
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
-
Alternative Part NumberVE-235
-
UNSPSC31171504
-
Warranty1 Year
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 767371 VE Series Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 2.188 in Dia Bore, 3.937 in OD, 2.813 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
ISOSTATIC™ Oilube® 401090 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 9/16 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401090 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 9/16 in OD, 1-1/4 in W
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
4-PIECE MINI PICK & HOOK SET-RGL19651 >
1.75" 120-MESH STAINLESS STEEL SCREEN-JOHASC2035RD01.750 >
Irwin® Record® 226303ZR Light Duty Portable Bench Vise, 2 in Jaw Opening, 3 in W Steel Jaw, 1-5/8 in D Throat
Irwin® Record® vises are built to handle any job. The impressive, versatile line of vises from Irwin® is designed with the most sought-after features to fit every application, from the garage workbench to the factory floor. Whether used for cutting, screwing, drilling, planning, sanding or just holding, there is an Irwin® Record® vise that's perfect for the any type of holding application. Designed and manufactured to the highest standards and built with the best available materials, Irwin® Record® vises are available in a variety of styles, jaw widths, jaw capacities, base types and clamping forces. Refer to the chart below to select the best vise for the job.
