Sealmaster® 700047 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 2-11/16 in Dia Bore, 4.9213 in OD, 2-3/4 in W, 13971 lb Dynamic/10063 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000441
-
Manufacturer Part Number700047
-
CountryUSA
-
Load Capacity13971 lb Dynamic/10063 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width2-3/4 in
-
Bearing MaterialSteel
-
Outside Diameter4.9213 in
-
Bore Diameter2-11/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-211
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® 700047 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 2-11/16 in Dia Bore, 4.9213 in OD, 2-3/4 in W, 13971 lb Dynamic/10063 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
GRINDING WHEELS-MGW62250676609>
3/4" X 3-1/2" SAE GR-5 Hex Head Capscrew
511609 DO-IT-BEST/LEVITON 14W/15W/20W 2-PIN T8 FS-4 FLOURESCENT STARTER
ALL PURPOSE, HEAVY DUTY. ACCURATELY TIMED FOR EFFICIENT FLUORESCENT LIGHT STARTING AND LONG LIFE
-JWH511609 >
3/4" X 2-3/4" SAE GR-5 Hex Head Capscrew
1" DIAMETERX6" SOCKET HEAD CAP SCREWS-HOL72390 >
