Browning 15/16"-ID SPH/OD INSERT BEARINGS BRW VE-115
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289519408
-
Manufacturer Part Number767765
-
CountryUSA
-
Load Capacity2801 lb Dynamic/1651 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3500 rpm
-
Closure TypeDouble Seal
-
TypeLight Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width1-17/64 in
-
SeriesVE 100
-
Bearing MaterialSteel
-
Outside Diameter2.0472 in
-
Bore Diameter15/16 in
- Eccentric locking design incorporates a precision eccentric collar to mate with the inner ring extension for shaft hold
- Positive contact molded nitrile rubber single lip contact seal
- An anti-rotation rivet prevents outer ring creep or rotation within the housing thru hardening inner race
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outside diameter
- Without Snap Ring
-
Alternative Part NumberVE-115
-
UNSPSC31171537
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
United Abrasives-SAIT 84108 Sanding Sheet, 11 in L x 9 in W, 220 Grit, Garnet Abrasive, Paper Backing
USS Bolt Bin Labels
ISOSTATIC™ Oilube® 101768 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-7/16 in OD, 2 in W
ISOSTATIC™ Oilube® 101768 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-7/16 in OD, 2 in W
Vortec Pro® 36018 Narrow Face Wheel Brush With Nut, 4 in Dia Brush, 0.02 in Dia Stringer Bead Knot Filament/Wire, 5/8-11 Arbor Hole
Vortec Pro® 36018 Narrow Face Wheel Brush With Nut, 4 in Dia Brush, 0.02 in Dia Stringer Bead Knot Filament/Wire, 5/8-11 Arbor Hole
Littelfuse® POWR-GARD® LKN125 LKN Fuse Link, 250 VAC, 125 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.

