Browning 1-11/16"-ID FL/OD INSERT BEARINGS BRW VER-227
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289859719
-
Manufacturer Part Number765303
-
CountryUSA
-
Load Capacity7901 lb Dynamic/5139 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeStandard-Duty Straight Bore
-
Seal MaterialRubber
-
Width1.938 in
-
SeriesVER 200
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter3.594 in
-
Bore Diameter1.688 in
- Single setscrew locking
- Single lip contact seal
- Zone hardened inner race
- Browning® VER bearings have the part number laser marked on the inner ring for easy verification of the part number during installation and for replacement
- Cylindrical outer diameter
- Relube through groove in outer diameter
-
Alternative Part NumberVER-227
-
UNSPSC31171504
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
-
Warranty Information
Recently Viewed
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
SIDE MOUNT TAKE-UP FRAMES-FYHSM209 >
Milwaukee® 1101-1 Grounded Electric Drill, 1/2 in Keyed Chuck, 120 VAC, 500 rpm Speed, 14-3/4 in OAL
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1101-1 features 500 RPM and can be used with our right angle drive attachment to increase versatility.
Milwaukee® M18™ FUEL™ 2755-20 Compact Cordless Impact Wrench With Pin Detent, 1/2 in Square Drive, 0 to 3200 bpm, 220 ft-lb Torque, 18 VDC, 6 in OAL
The M18™ FUEL™ 1/2 in compact impact wrench with pin detent is the most powerful tool in its class by delivering upto 220 ft-lb of torque in a compact design. The POWERSTATE™ brushless motor not only provides unmatched power, but also provides greater efficiency, delivering upto 25% more runtime than the leading competitors. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM™ batteries (not included) deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility by delivering 0 to 900 rpm in mode 10 to 1600 rpm in mode 2 and 0 to 2500 rpm in mode 3. Auto shut-off mode intelligently detects when the tool has impacted on a fastener for one second and automatically shuts the tool down, reducing the likelihood of overdriving and damaging materials.
ISOSTATIC™ Oilube® 402107 Round Bore Flange Bearing, 1 in Dia Bore, 1-1/4 in OD, 1 in W, 1-5/8 in Dia Flange
ISOSTATIC™ Oilube® 402107 Round Bore Flange Bearing, 1 in Dia Bore, 1-1/4 in OD, 1 in W, 1-5/8 in Dia Flange
ISOSTATIC™ Oilube® 302063 Round Bore Flange Bearing, 5/8 in Dia Bore, 1 in OD, 1 in W, 1-1/4 in Dia Flange
ISOSTATIC™ Oilube® 302063 Round Bore Flange Bearing, 5/8 in Dia Bore, 1 in OD, 1 in W, 1-1/4 in Dia Flange

