Sealmaster 1-1/4"-ID FLAT/OD INSERT BEARINGS SEA ER-20
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461008614
-
Manufacturer Part Number701063
-
CountryUSA
-
Load Capacity5782 lb Dynamic/3493 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed4650 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width1-11/16 in
-
SeriesER Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter2.8364 in
-
Bore Diameter1-1/4 in
- ER style cylindrical OD bearing with snap and with black oxided bearing rings
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Felt labyrinth seal and flinger for dry and dusty environment
- Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
- Lithium complex NLGI #2 grease with an EP additive
- ER style cylindrical OD bearing with snap and with black oxided bearing rings_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Felt labyrinth seal and flinger for dry and dusty environment_x005f Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
-
Alternative Part NumberER-20
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
#10 X 1-3/4" Pan Head Phillips Sheet Metal Screw
Proto® J5334CF Crowfoot Wrench, Imperial, 1-1/16 in Wrench, 1/2 in Drive, 2-7/8 in OAL, ASME B107.21, Full Polished
PIX 550-J-10 POLY RIB J V-BELT, 55" OC 10 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 10 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J10 >
5/16" DIAMETERX3/4" SOCKET HEAD CAP SCREWS-HOL72124 >
54 TOOTH TAPER-LOCK SPROCKETS FOR #35 CHAIN-IDC35BTL54 >
