Dodge® 128648 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 2.0472 in OD, 1.44 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 128648 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 2.0472 in OD, 1.44 in W, 3146 lb Dynamic/1769 lb Static Load
-
BrandDodge®
-
UPC782475890361
-
Manufacturer Part Number128648
-
CountryUSA
-
Load Capacity3146 lb Dynamic/1769 lb Static
-
Temperature Rating250 deg F
-
FinishUncoated
-
Maximum Speed1600 rpm
-
TypeNormal Duty
-
Width1.44 in
-
Series205
-
Bearing MaterialCast Iron
-
Outside Diameter2.0472 in
-
Bore Diameter1 in
- Precision-hardened and honed inner and outer rings
- New rugged housing design
- Normal duty wide inner ring
- D-LOK® locking mechanism
- Dual guard positive contact seal including rubberized flingers
- Stronger and flexible ball retainer
- Simplified anti-rotation device
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100939535 |
| Applied Industrial Technologies | 100939535 |
-
Alternative Part NumberINS-DL-100
-
UNSPSC31171536
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Dodge® 128648 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 2.0472 in OD, 1.44 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 128648 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 2.0472 in OD, 1.44 in W, 3146 lb Dynamic/1769 lb Static Load
Sealmaster® 700398 SEHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit, 1-7/16 in Dia Bore, 3-3/4 in OD, 1-15/16 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
Browning® 767409 VPLS 200 Normal Duty Low Base Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5-13/64 to 6-7/64 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-3/8 in OAL x 4-3/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Sealmaster® 700367 SCHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit With Seal Flinger, 2 in Dia Bore, 4.38 in OD, 2.03 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Dodge® 126814 211 Medium Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6.38 to 7.44 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL x 4.96 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
