INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
-
BrandDodge®
-
UPC782475226276
-
Manufacturer Part Number123343
-
CountryUSA
-
Load Capacity7332 lb Dynamic/4475 lb Static
-
Cage MaterialCast Iron
-
Temperature Rating225 to 400 deg F
-
FinishUncoated
-
Maximum Speed5000 rpm
-
TypeNormal Duty
-
Width1.94 in
-
Series208
-
Outside Diameter3.1496 in
-
Bore Diameter1-5/8 in
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 101874720 |
| Applied Industrial Technologies | 101874720 |
-
Alternative Part NumberINS-SC-110
-
UNSPSC31171504
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
INS-SC-110 Dodge® 123343 208 Normal Duty Set Screw Ball Bearing, 1-5/8 in Dia Bore, 3.1496 in OD, 1.94 in W, 7332 lb Dynamic/4475 lb Static Load
INS-SC-107 Dodge® 123368 207 Normal Duty Set Screw Ball Bearing, 1-7/16 in Dia Bore, 2.8346 in OD, 1.71 in W, 5759 lb Dynamic/3461 lb Static Load
INS-SC-107 Dodge® 123368 207 Normal Duty Set Screw Ball Bearing, 1-7/16 in Dia Bore, 2.8346 in OD, 1.71 in W, 5759 lb Dynamic/3461 lb Static Load
Climax G2SC-200-B Industry Standard Clamping Collar, 2-Piece Construction, 2 in ID x 3 in OD x 11/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Climax G2SC-100-SS Industry Standard Clamping Collar, 2-Piece Construction, 1 in ID x 1-3/4 in OD x 1/2 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Browning® 1222553 Minimum Plain Bore Type C1 Change Gear, 16 Diametral Pitch, 14.5 deg Pressure Angle, 1/2 in W Face, 33 Teeth, 2.063 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
5/8" DIAMETERX4-1/2" SHOULDER BOLT-HOL08122 >
