FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
-
BrandFYH®
-
Manufacturer Part NumberNA210 50MM
-
CountryUSA
-
Load Capacity35.1 kN Dynamic/23.3 kN Static
-
Closure TypeEccentric Locking Collar
-
TypeCylindrical
-
Width2.46 in
-
SeriesNA Series
-
Bore Diameter50 mm
Recently Viewed
FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing.
Hot-dip galvanized steel.
Hooks are forged with a greater cross-sectional area that results in a stronger hook with better fatigue properties.
Dremel® 412 Sanding Disc, 220 Grit, 3.2 mm Shank
SPRAYS UPSIDE DOWN FOR EASY, COMPLETE APPLICATION. EFFECTIVELY REPELS MOSQUITOES, TICKS, GNATS, BITING FLIES, CHIGGERS, AND FLEAS FOR HOURS
-JWH713482>
Leviton® Decora® 80405-W Standard Size Combination Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Thermoset, White
Leviton® Decora® designer wallplates - available in a wide spectrum of colors and styles - can add subtle elegance to any home. You can go modern with Decora® Plus screwless, snap-on wallplates, which install fast and flawlessly. Sleek, versatile and convenient, they now come in a midway size that gives even greater coverage and can hide unsightly wall surface irregularities. All Leviton® decorative wallplates can stand up to heavy use while coordinating perfectly with paint or wallcoverings. Think of them as the finishing touch to giving a home its signature look.
Littelfuse® POWR-GARD® LKN005 Fuse Link, 250 VAC, 5 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
