Sealmaster® 700420 SEHB Standard-Duty Hanger Ball Bearing Unit With Seal Flinger, 2.69 in Dia Bore, 6-1/2 in OD, 3.06 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
-
BrandSealmaster®
-
UPC662461003244
-
Manufacturer Part Number700420
-
CountryUSA
-
Load Capacity14839 lb Dynamic/11224 lb Static
-
Locking TypeSet Screw Collar
-
Cage MaterialMetal
-
Temperature Rating250 deg F
-
FinishUncoated
-
Maximum Speed2450 rpm
-
TypeStandard-Duty
-
Seal MaterialFelt
-
Width3.06 in
-
SeriesSEHB
-
Bearing MaterialCast Iron
-
Outside Diameter6-1/2 in
-
Bore Diameter2.69 in
- Zone hardened inner race
- All bearings are assembled with a controlled housing fit between the bearing outer ring and housing bore
- Powder coated epoxy cast iron housing with extended inner ring bearings
- Felt labyrinth seal and flinger for dry and dusty environment
- Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
- Sealmaster exclusive lock pin and dimple for direct lubrication and anti-rotation
-
Alternative Part NumberSEHB-43
-
UNSPSC31171515
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® 700420 SEHB Standard-Duty Hanger Ball Bearing Unit With Seal Flinger, 2.69 in Dia Bore, 6-1/2 in OD, 3.06 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Coilhose® YBREEL60504AY Yellow Belly™ Straight Air Hose, 1/4 in, MNPT Rigid, 50 ft L, 300 psi, Hybrid PVC Resin
Coilhose® YBREEL60504AY Yellow Belly™ Straight Air Hose, 1/4 in, MNPT Rigid, 50 ft L, 300 psi, Hybrid PVC Resin
MCR Safety 39100M Limited Flammability Cape Sleeve, M, Green, Cotton, Anodized Button Snap Closure
MCR Safety 39100M Limited Flammability Cape Sleeve, M, Green, Cotton, Anodized Button Snap Closure
1-QT 30-W NON-DETERGENT MOTOR OIL - VAL265>
RectorSeal® 88312 Nickel-Safe Ice Machine Cleaner, 16 oz Bottle, Liquid
Nickel-Safe Ice Machine Cleaner is formulated as the safest product for nickel-plated evaporators. It assures clean cold taste-free ice by stripping ice machines of scale, muck and slime. In cube or flake ice, impurities cause opacity, bad taste and foul odor.
MasterDrive L075-20MM L075 Standard Jaw Coupling, 20 mm Dia Bore, 0.82 in L Through Bore, 1.75 in Dia Hub, Powdered Metal
Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an elastomer or bronze element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails.
