Browning 2-15/16"-ID 4-BOLT TRB FLANGE UNIT BRW FBE-920 X 2-15/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
-
BrandBrowning®
-
UPC662289598786
-
Manufacturer Part Number730031
-
CountryUSA
-
Load Capacity9630 lb Dynamic
-
Locking DeviceDouble Set Screw Collar
-
Temperature Rating-20 to 200 deg F
-
FinishUncoated
-
Flange Mounting Type4-Bolt
-
Maximum Speed1500 rpm
-
TypeNon-Expansion Round/Straight Bore
-
Seal MaterialRubber
-
SeriesFBE920
-
Bearing MaterialCast Iron
-
Bolt Center-to-Center Length6 in
-
Bolt Circle Diameter8-31/64 in
-
Bore Diameter2-15/16 in
-
Overall Depth4-11/16 in
-
Overall Height7-3/4 in
-
Overall Length/Diameter7-3/4 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Single lip contact face-riding seals rotate with the shaft
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt cast iron housing
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt cast iron housing
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading_x005f Single lip contact face-riding seals rotate with the shaft_x005f Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews_x005f Powder coat epoxy 2-bolt cast iron housing
-
Alternative Part NumberFBE920X 2 15/16
-
UNSPSC31171500
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning 2-15/16"-ID 4-BOLT TRB FLANGE UNIT BRW FBE-920 X 2-15/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
1-QT MULTI-SURFACE POLISH/CLEANER-ML-SP730QT>
Dodge® 83310 First Stage Pinion Gear, 43.5 Diametral Pitch, 64 Teeth, 1 in Dia Pitch
Dodge® 83310 First Stage Pinion Gear, 43.5 Diametral Pitch, 64 Teeth, 1 in Dia Pitch
Dodge® 083404 First Stage Pinion Gear, 78 Diametral Pitch, 75 Teeth, 1-1/2 in Dia Pitch
Dodge® 083404 First Stage Pinion Gear, 78 Diametral Pitch, 75 Teeth, 1-1/2 in Dia Pitch
1/4" -HOSEX12-MM HOSE END 90-DEG-MHDE0412FML90 >
1/8-OZ SPRING-LOADED GALLON JUG PUMP-CON6918OZ >
