Sealmaster 1-3/4"-ID 4-BOLT SPH FLANGE UNITS BRW SFC-1000-NE X 1-3/4
Sealmaster® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options.
-
BrandSealmaster®
-
UPC662461363348
-
Manufacturer Part Number737268
-
CountryUSA
-
Load Capacity22689 lb Dynamic/28021 lb Static
-
Locking DeviceCollar Mount/Set Screw
-
Temperature Rating-20 to 220 deg F
-
FinishUncoated
-
Flange Mounting Type4-Bolt
-
Maximum Speed4000 rpm
-
TypeNon-Expansion Round/Straight Bore
-
Seal MaterialFelt
-
SeriesUSFC5000
-
Bearing MaterialCast Iron
-
Bolt Circle Diameter5-1/8 in
-
Bore Diameter1-3/4 in
-
Overall Depth2-7/8 in
-
Overall Length/Diameter6-1/8 in
- Sealmaster® performance mounted roller bearings feature locking collars and setscrews at 120 deg, providing a balanced 3-point contact
- The wide outer race, coupled with innovative rolling element geometries, provides increased load capacity
- Retainer metal
- 52100 black oxide coated steel bearing
- Wide race and rollers and steel cage for high dynamic load ratings
- Race-mounted felt seal with flinger and misalignment sealing
- Single-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy cast iron housing
-
Alternative Part NumberUSFC5000-112
-
UNSPSC31171500
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 1-3/4"-ID 4-BOLT SPH FLANGE UNITS BRW SFC-1000-NE X 1-3/4
Sealmaster® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options.
The DCB206 DEWALT 20V MAX 6.0Ah XR Battery provides immediate feedback on state of charge with the 3-LED Fuel Gauge System and has a lightweight design for easy transporting of DEWALT 20V MAX battery.
Koyo IR-2424 Inch Series Regular Width Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1.515 in OAW, For Use With Inch Series Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Zurn® QickTite® QC33F Unassembled Female Coupling, 1/2 in Nominal, FNPT End Style
#10 X 2-1/2" Flat Head Phillips Sheet Metal Screw
BBI 221124 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 2-1/4 in L Shoulder, 3/8-16
BBI 221124 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 2-1/4 in L Shoulder, 3/8-16
