FC-S2-300L Dodge® 070712 215 Non-Expansion Type S-2000 Flange Mount Roller Bearing Unit, 3 in Dia Bore, 5.3 in L Bolt Center-to-Center, 7-1/2 in Dia Bolt Circle, Piloted Flange Mount, 8-3/4 in OAL/Dia
Unit-housed double-row Dodge® S-2000 spherical roller bearings have higher ratings and long L10 life. A variety of housing styles and sealing options allow for easy application on material and air handling machinery. Industry standard dimensions make the products interchangeable with many brands.
-
BrandDodge®
-
UPC782475315246
-
Manufacturer Part Number070712
-
CountryUSA
-
Load Capacity41500 lb Dynamic/53000 lb Static
-
Locking Device65 deg Set Screw
-
Temperature Rating-100 to 200 deg F
-
FinishPowder Coated
-
Flange Mounting TypePiloted
-
Maximum Speed2040 rpm
-
TypeNon-Expansion Type S-2000
-
Seal MaterialMetal
-
Series215
-
Bearing MaterialSteel
-
Bolt Center-to-Center Length5.3 in
-
Bolt Circle Diameter7-1/2 in
-
Bore Diameter3 in
-
Overall Depth3.64 in
-
Overall Length/Diameter8-3/4 in
- Factory lubed, sealed and adjusted
- Larger rollers
- More contact area
- Case-carburized inner rings resist cracking
- Static or dynamic misalignment up to +/-1 deg
- Expansion capability up to 3/8 in
- Corrosion resistant flinger blocks contaminants
- Reinforced polyamide cage
- 65 deg setscrew angle Springlok™ collar/ flingers - more holding power than 90 to 120 deg
- Metallic labyrinth seal and steel cage provide high temperature and high-speed capabilities
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100738796 |
| Applied Industrial Technologies | 100738796 |
| Motion Industries | 02317462 |
| Motion Industries | 02317462 |
-
Alternative Part NumberFC-S2-300L
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Warranty Information
-
Line Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
FC-S2-300L Dodge® 070712 215 Non-Expansion Type S-2000 Flange Mount Roller Bearing Unit, 3 in Dia Bore, 5.3 in L Bolt Center-to-Center, 7-1/2 in Dia Bolt Circle, Piloted Flange Mount, 8-3/4 in OAL/Dia
Unit-housed double-row Dodge® S-2000 spherical roller bearings have higher ratings and long L10 life. A variety of housing styles and sealing options allow for easy application on material and air handling machinery. Industry standard dimensions make the products interchangeable with many brands.
Sealmaster® 550249 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing Unit, 1-3/4 in Dia Bore, 4-3/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 5-5/8 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options as illustrated on the pages to follow.
MCR Safety 3211L 3211 General Purpose Gloves, Driver, Gunn Cut/Keystone Thumb Style, Grain Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Beige, Slip-On Cuff, Resists: Abrasion, Puncture and Tear, Unlined Lining
From wranglin' to buildin', these gloves are tough for the job! cowhide is the most commonly used leather due to availability. Characteristics include a good balance between abrasion-resistance, dexterity, durability and comfort. The 3211 drivers gloves feature; unlined select cow grain leather, shirred elastic back, cotton hemmed, and a keystone thumb pattern.
KNITTY GRITTY KNIT GLOVES-BST66NFW>
Sealmaster® 550246 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing unit, 1-1/2 in Dia Bore, 4-1/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 5-3/8 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
Dodge® 070660 307 Non-Expansion Type S-2000 Spherical Roller Bearing Unit, 3-7/16 in Dia Bore, 6.09 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 10-1/4 in OAL/Dia
Unit-housed double-row Dodge® S-2000 spherical roller bearings have higher ratings and long L10 life. These bearings are in cast iron housings and available in pillow block, flange, and piloted flange versions. A variety of sealing options for easy application and protection make the Dodge® S-2000 a high-capacity bearing with maximum life.
