Browning 1-7/16"-ID 2-BOLT BB FLANGE UNITS BRW VF-2-S-123
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289521227
-
Manufacturer Part Number767754
-
CountryUSA
-
Load Capacity5782 lb Dynamic/3493 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating-20 to 200 deg F
-
FinishGray Painted
-
Flange Mounting Type2-Bolt
-
Maximum Speed2500 rpm
-
TypeIntermediate Duty Non-Expansion
-
Seal MaterialNitrile Rubber
-
SeriesVF2S 100
-
Bearing MaterialSteel
-
Bolt Center-to-Center Length5-1/8 in
-
Bore Diameter1-7/16 in
-
Overall Depth1-39/64 in
-
Overall Height6-1/8 in
-
Overall Length/Diameter3-5/8 in
- Powder coat epoxy cast iron housing
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Single lip contact seal
- 52100 steel insert
- Powder coat epoxy cast iron housing
- Powder coat epoxy cast iron housing_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal
-
Alternative Part NumberVF2S-123
-
UNSPSC31171504
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
HCI Preferred Supplier 22015 Sleeve Tube Insert, 3/4 in, Compression, Brass
HCI Preferred Supplier 22015 Sleeve Tube Insert, 3/4 in, Compression, Brass
IKO LHS8L L-Ball Rod End, 8 mm Dia Bore, 24 mm W, 4900 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
1/4X1-1/2-B-N 1/4" -male Pipe Thread x 1-1/2" Black Nipple
1/4" -MALE PIPE THREADX1-1/2" BLACK NIPPLE
1" RIGHT HAND TOP LINK REPLACEMENT ENDS-HIG00347>
