EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing
EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing
-
BrandDodge®
-
UPC782475958290
-
Manufacturer Part Number128209
-
CountryUSA
-
Width2-11/32 in
-
Series207
-
Housing MaterialPolymer
-
Outside Diameter3-1/4 in
- Injected molded, impact resistant, OSHA safety yellow end covers meet requirements for exposed rotating shafts
- Stainless steel "C" washer for gripping power
- No modification or machining of existing housings required
- Concentric knockout grooves on inside of end cover for thru-shaft
-
Alternative Part NumberEC-207-X
-
UNSPSC31171545
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
-
Line Drawing
Recently Viewed
EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing
EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing
BBI 221184 Shoulder Screw, Round Socket Head, Alloy Steel, 5/8 in Dia x 3-1/4 in L Shoulder, 1/2-13
BBI 221184 Shoulder Screw, Round Socket Head, Alloy Steel, 5/8 in Dia x 3-1/4 in L Shoulder, 1/2-13
.0620" X 1-5/16" HAIR PINS-GLHBP222>
BBI 221250 Shoulder Screw, Round Socket Head, Alloy Steel, 3/4 in Dia x 4-1/2 in L Shoulder, 3/4-5/8-11
BBI 221250 Shoulder Screw, Round Socket Head, Alloy Steel, 3/4 in Dia x 4-1/2 in L Shoulder, 3/4-5/8-11
FREUDENBERG Simmering® 75040594 B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 15X28X5SC-BX B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
Browning® 1296615 T65L Automatic Torque Limiter, 1-15/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
