Koyo 1313 Caged Cylindrical Bore Medium Self-Aligning Ball Bearing, 65 mm Dia Bore, 140 mm OD, 2 Rows, 33 mm W, 61.7 kN Dynamic/22.9 kN Static Load
Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meets that of the bearing itself, so that the inner ring, balls and cage continue to rotate, aligning themselves if they have become misaligned within design limits.
-
BrandKoyo
-
UPC605790001895
-
Manufacturer Part Number1313
-
CountryUSA
-
Load Capacity61.7 kN Dynamic/22.9 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed4300 rpm Grease/5200 rpm Oil
-
Closure TypeOpen
-
TypeCaged Cylindrical Bore Medium
-
Width33 mm
-
Series13 Series
-
Number of Rows2
-
Outside Diameter140 mm
-
Bore Diameter65 mm
- This type of bearing is suitable when the displacement of the centers around which the shaft and housing rotate and shaft deflection are likely to occur
- Bearing with a tapered bore can easily be fit to the shaft with an adapter assembly
-
UNSPSC31171532
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Koyo 1313 Caged Cylindrical Bore Medium Self-Aligning Ball Bearing, 65 mm Dia Bore, 140 mm OD, 2 Rows, 33 mm W, 61.7 kN Dynamic/22.9 kN Static Load
Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meets that of the bearing itself, so that the inner ring, balls and cage continue to rotate, aligning themselves if they have become misaligned within design limits.
Contains 1 of each thickness: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.0075 in, 0.01 in, 0.0125 in, 0.015 in, 0.02 in, 0.025 in and 0.03 in. Made of the highest quality plastic material: 0.001 in to 0.005 in - polyester, 0.0075 to 0.03 in - vinyl. Assortment contains 13 blades riveted together for on-site convenience and is packaged in a sturdy vinyl case. Non-corrosive, non-conductive, non-sparking and non-marring. Color indicates thickness . Precision Brand® feeler gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.
PRESSURE SWITCH 4-PORT 145-175PSI-MIS3004014H >
IKO BA208ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/4 in Dia Bore, 1-1/2 in OD, 1 Row, 1/2 in W, 9100 N Dynamic/14700 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
United Abrasives- SAIT 23222 Type 1 6-1/2 by 3/32 by DIA A24R Cutting Wheel, 25-Pack
6-1/2" X 3/32" X 5/8" CUTOFF WHEEL
BBI 644198 Partially Threaded Hex Bolt, M16x2, 170 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644198 Partially Threaded Hex Bolt, M16x2, 170 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
