Eveready® NH15BP2 Rechargeable Battery Pack, Nickel-Metal Hydride, 1.2 VDC V Nominal, 2300 mAh Nominal, AA
Eveready® NH15BP2 Rechargeable Battery Pack, Nickel-Metal Hydride, 1.2 VDC V Nominal, 2300 mAh Nominal, AA
-
BrandEveready®
-
UPC039800008688
-
Manufacturer Part NumberNH15BP2
-
CountryUSA
-
Terminal TypeFlat/Nub
-
Maximum Discharge Current460 mA
-
Chemical SystemNickel-Metal Hydride
-
Nominal Capacity2300 mAh
-
Nominal Voltage1.2 VDC
-
Battery SizeAA
-
Dimensions14.5 mm L x 14.5 mm W x 50.5 mm H
-
Internal Impedance12 mOhm
- 0 to 40 deg C operating, -20 to 30 deg C storage temperature
- 65 Plus/Minus 20 PCT humidity
- Store in a cool, well ventilated area, elevated temperatures can result in shortened battery life
- Plastic label
-
UNSPSC26111701
-
Standards/ApprovalsANSI-1.2H2|IEC-HR6
-
Specification Sheet
Recently Viewed
Eveready® NH15BP2 Rechargeable Battery Pack, Nickel-Metal Hydride, 1.2 VDC V Nominal, 2300 mAh Nominal, AA
Eveready® NH15BP2 Rechargeable Battery Pack, Nickel-Metal Hydride, 1.2 VDC V Nominal, 2300 mAh Nominal, AA
HCI Preferred Supplier 28553S Industrial Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Steel
HCI Preferred Supplier 28553S Industrial Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Steel
4-LB WEBPATCH 90 FLOOR PATCH - JWH263567 >
Drillco 380A030 Type C Heavy Duty Stub Length Screw Machine Length Drill, #30 Drill - Wire, 0.0551 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
DRILLCO 21PS132C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 1/2-13 Thread, H5 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
Dual Spiral Flutes on VACO Step Drill Bits help pull the step bit through material for faster cutting. The Titanium Nitride coating extends the life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Available in five step bit sizes with commonly used hole sizes for steel (up to 16 gauge), plastic, aluminum, and wood.
