Duracell® MX2500 Ultra Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 625 mAh, AAAA
Duracell is the #1 trusted brand of pharmacists and first responders, so you know it is a battery you can trust. It is guaranteed for five years in storage with Duralock Power Preserve™ Technology. The batteries also contain 0% mercury.
-
BrandDuracell®
-
UPC041333222073
-
Manufacturer Part NumberMX2500
-
CountryUSA
-
Terminal TypeFlat
-
Chemical SystemZinc-Manganese Dioxide
-
Nominal Capacity625 mAh
-
Nominal Voltage1.5 VDC
-
Shelf Life6 to 8 years
-
Battery SizeAAAA
-
Dimensions8.3 mm L x 8.3 mm W x 42.5 mm H
-
Discharge Cut-Off Voltage1.2 VDC
-
Internal Impedance240 mOhm
-
Life Hour0.4 hr
- Delivered capacity is dependent on the applied load, operating temperature and cut-off voltage
- -20 to 54 deg C operating temperature
- 0.4 hr at 1.2 V, 750 mW life hour
- 2.02 cu-cm volume
- 1.2 V at 0.4 HR, 750 mW life hour
-
UNSPSC26111702
-
Standards/ApprovalsANSI 25A|IEC LR8D425
-
Specification Sheet
Recently Viewed
Duracell® MX2500 Ultra Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 625 mAh, AAAA
Duracell is the #1 trusted brand of pharmacists and first responders, so you know it is a battery you can trust. It is guaranteed for five years in storage with Duralock Power Preserve™ Technology. The batteries also contain 0% mercury.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
2 GROOVE BANDED 5-V-900 V-BELT-GAT2/5V900 >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
#8 X 5/8" Flat Head Phillips Sheet Metal Screw
GEARWRENCH® 70-274G Roll Pin Punch, 5/16 in Round Tip, 6 in OAL, Alloy Steel Tip
We design and build GEARWRENCH® punches and chisels for a long tool life and a focus on safety. The precision ground surfaces provide better visibility, letting you identify your tools at a glance. They are manufactured from precision hardened alloy steel designed to punch metal, but the striking surface is softened to reduce chipping risk. The hexagon stock fits securely into a clamp or holder and the surface is ground and laser etched for easy size identification.
