Duracell® PC1500 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 2.7 Ah, AA
Duracell® PC1500 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 2.7 Ah, AA
-
BrandDuracell®
-
UPC041333515403
-
Manufacturer Part NumberPC1500
-
CountryUSA
-
Terminal TypeFlat
-
Chemical SystemZinc-Manganese Dioxide
-
Nominal Capacity2.7 Ah
-
Nominal Voltage1.5 VDC
-
Shelf Life6 to 8 years
-
Battery SizeAA
-
Dimensions14.5 mm Dia x 50.5 mm H
-
Discharge Cut-Off Voltage1.5 VDC
-
Internal Impedance120 mOhm
-
Life Hour9 hr
- 8.4 cu-cm volume
- 9 hr at 3.9 Ohm, 1.5 V Life Hours
- 1.5 V at 3.9 Ohm, 9 hr, 21 deg C discharge cut-off voltage
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 21EP51 |
-
UNSPSC26111702
-
Specification Sheet
Recently Viewed
Duracell® PC1500 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 2.7 Ah, AA
Duracell® PC1500 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 2.7 Ah, AA
GOLD MIGHTY MARKER PAINT MARKER 00416 - ARRPM16GOLD>
1/2"-ID SHAFT COLLARS-JWH344586>
MCR safety stocks a variety of ANSI rated safety vests for your high-visibility needs. With an assortment of styles and colors, you can choose a garment that ensures that you show up in a variety of complex backgrounds. It can be a matter of life or death, so be seen in MCR Safety's hi-vis apparel.
Browning® 767751 VS 100 Intermediate Duty Straight Bore Ball Bearing Insert, 1-7/16 in Dia Bore, 2.8346 in OD, 1-9/32 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.
