Master Locks COMBINATION PADLOCKS W/KEYLOCK MAS 1525
Master Lock® Combination Lock with Key Control. Equivalent to 1525. 1-7/8 in (48 mm) wide durable stainless steel lock body. 9/32 in (7 mm) Dia, 3/4 in (19 mm) high, 13/16 in (21 mm) wide shackle. Combination different. 3-digital dialing with 1500 combinations for maximum security. Hardened steel shackle for extra cut resistance. commercial boxed packaging, master carton 25. Spec Number (CID): n/a. Without chain. Set size of 1, master carton quantity 25.
-
BrandMaster Lock®
-
UPC071649402005
-
Manufacturer Part Number1525
-
CountryUSA|Canada
-
Locking MechanismAnti-Shim Technology
-
ColorBlack
-
Type1-Stage General Security Combination
-
Shackle Diameter9/32 in
-
Shackle Height3/4 in
-
Shackle MaterialHardened Steel
-
Shackle Width13/16 in
-
Key TypeControl Key
-
Body MaterialStainless Steel
-
Body Width1-7/8 in
- Not for consumer purchase
- Patented BlockGuard® anti-shim technology withstands attempts to violate the latch mechanism
- Includes combination chart to facilitate lock system administration
- Key control feature provides supervisory access; specify key to match existing system or factory assigned
- 1-7/8 in wide double reinforced stainless steel body withstands abuse
- 3/4 in tall, hardened steel shackle for extra cut resistance
- Easy 3-number dialing with automatic scrambling feature to prevent reopening of lock
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 99509628 |
-
UNSPSC46171501
-
Package DescriptionEACH
-
WarrantyLifetime Limited
-
Warranty Information
Recently Viewed
Master Lock® Combination Lock with Key Control. Equivalent to 1525. 1-7/8 in (48 mm) wide durable stainless steel lock body. 9/32 in (7 mm) Dia, 3/4 in (19 mm) high, 13/16 in (21 mm) wide shackle. Combination different. 3-digital dialing with 1500 combinations for maximum security. Hardened steel shackle for extra cut resistance. commercial boxed packaging, master carton 25. Spec Number (CID): n/a. Without chain. Set size of 1, master carton quantity 25.
Dremel® 83142 Grinding Stone, 3.2 mm Dia Shank
MORSE® 11466 1332 General Purpose Jobber Length Drill Bit, P Drill - Letter, 0.323 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Browning® 1045319 VP Series Type 1 Variable Pitch Sheave, 5/8 in Finished Bore, 3-3/4 in OD, 1 Groove, 2.3 to 3.1 in (3L)/2.6 to 3.6 in (A/4L)/2.8 to 3.8 in (5L/B) Dia Pitch, 21/32 to 1-1/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 087544 Fully Threaded Cap Screw, 3/4-16, 1-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
3/4" X 1-1/2" SAE GR-5 Hex Head Capscrew
BBI 087520 Partially Threaded Cap Screw, 3/4-10, 3-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
3/4" X 3-1/2" USS GR-5 Hex Head Capscrew
