Duct Collars
Oatey® 14206 Rain Collar, 2 in
Oatey® Rain Collar For No-Calk® Roof Flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years.
Recently Viewed
Milwaukee® M12™ 48-20-7477 2-Cutter Single Tip Rotary Hammer Drill Bit, 1/2 in Drill Bit, SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
IDEAL® Aqua-Gel® II 31-378 Cable Pulling Lubricant, 1 qt Squeeze Bottle, Gel Form, Blue, 0.98
IDEAL Aqua-Gel II Non-toxic cable pulling lubricant in clear blue color is a polymer-based formula that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from 28°F to 180°F (-2°C to 88°C). Lubricant is convenient to apply by hand, brush or pump. It is well suited with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55-gallon drum. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only.
VIBRATION CONTROL HANDLE, FOR 1853-5 7" X 9" LARGE ANGLE SANDER-BSH1602025030 >
R12+ Dropheads ship completely assembled and ready to use with HSS segmental dies already in place. R12+ Dropheads can be used manually with the ratchet ring and handle or with REED's 700PD, 700APD and 701PD Power Drives. R12+ dropheads are interchangeable with RIDGID® 12-R dropheads and can also be utilized in the RIDGID® 700 power drive.
Klein® KHHSPN2 Open Frame Premium Replacement Suspension, 4 Suspension Points, For Use With KARBN™ Full Brim Hard Hat and Cap, Nylon, 6-Point Ratchet Pivoting Adjustment
The Klein® hard hat Replacement Suspension works with Klein® KARBN™ full brim hard hats. Easily attaches in four points inside the hard hat shell, featuring a flexible open frame design for maximum air flow. Ratchet knob and pivot adjustment help to position securely on the neck. Also available, premium replacement cooling sweatband and premium replacement top pad (sold separately).
