Loctite® 88448 277™ High Strength Large Bolt Medium Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
LOCTITE® 277 is a red, high strength, high viscosity, methacrylate-based thread locking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.
-
BrandLoctite®
-
UPC079340277311
-
Manufacturer Part Number88448
-
CountryCanada
-
Temperature Rating-65 to 300 deg F
-
Flash Point>199.94 deg F
-
FormLiquid
-
ColorRed
-
TypeHigh Strength Large Bolt Medium Viscosity
-
Viscosity Rating7000 cPs
-
Container Size50 mL
-
Container TypeBottle
-
Applicable MaterialsMetal
-
Series277™
-
Curing Time24 hr at 77 deg F (Full)
-
Setting Time60 min
-
Shear Strength1300 psi
-
Base TypeMethacrylate
-
Specific Gravity1.1
-
Drying Time60 min
- Protects threads from rust and corrosion
- Acrylic chemical compound
- Anaerobic curing method
- Resists acetone, brake fluid, corrosive process, ethanol, hydrochloric acid-10%, moisture, motor oil, unleaded gasoline
- Slightly soluble in water
- Removable with heat and hand tools
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3KE49 |
| Grainger | 3KE49 |
-
Alternative Part Number27731
-
UNSPSC31201701
-
Package Description1/PK
-
Standards/ApprovalsASTM D5363 Group 2 Class 1 Grade 1|ISO Certified|MIL-S-46163A Type I Grade L|OSHA 29 CFR 1910.1200|RoHS 2011/65/EU
-
SDS
Recently Viewed
Loctite® 88448 277™ High Strength Large Bolt Medium Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
LOCTITE® 277 is a red, high strength, high viscosity, methacrylate-based thread locking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.
Crosby® QUIC-CHECK® 3522216 A-342 Master Link, 1-1/2 in Trade, 61100 lb Load, Alloy Steel
Crosby® QUIC-CHECK® 3522216 A-342 Master Link, 1-1/2 in Trade, 61100 lb Load, Alloy Steel
SEAT, SPRINGS, AND CONICAL SPRINGS DELTA REPAIR KIT FOR SINGLE HANDLE FAUCET CONTAINS 2" EACH-JWH420707 >
EXACTO KNIFE BLADE--PACKAGE OF 2-JWHX104 >
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
