Loctite 10-ML #290 GREEN THREADLOCKER LOC 29021
LOCTITE® 290 is a liquid medium/high-strength thread locker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.
-
BrandLoctite®
-
UPC079340290211
-
Manufacturer Part Number233731
-
CountryCanada
-
Temperature Rating-65 to 300 deg F
-
Flash Point>199.94 deg F
-
FormLiquid
-
ColorGreen
-
TypeLow Viscosity Medium High Strength Wicking Grade
-
Viscosity Rating25 to 55 cPs
-
Container Size10 mL
-
Container TypeBottle
-
Applicable MaterialsMetal
-
Series290™
-
Curing Time24 hr
-
Setting Time20 min
-
Shear Strength780 psi
-
Specific Gravity1.07
-
Drying Time20 min
- Penetrates threads by capillary action
- Seals welds and porous metal parts
- Anaerobic curing method slightly soluble in water
- Removable with heat and hand tools
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LM5029021 |
-
Alternative Part Number29021
-
UNSPSC31201701
-
Package Description1/PK
-
Standards/ApprovalsASTM D-5363|CFIA Certified|MIL-S-46163A|NSF/OEM Approved|OSHA 29 CFR 1910.1200|CSA Approved
-
SDS
Recently Viewed
LOCTITE® 290 is a liquid medium/high-strength thread locker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.
Browning® 1223726 Minimum Plain Bore Type C1 Change Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 59 Teeth, 4.917 in Dia Pitch, 1 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
#12 X 3/4" Pan Head Phillips Sheet Metal Screw
2-1/2" CHIP PAINT BRUSHES-CCA1025 >
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
MARXMAN™ 85078 330QI General Purpose Jobber Length Drill Bit, #24 Drill - Wire, 0.152 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
