Loctite® 22423 518™ Eliminator Gasket Flange Sealant, 25 mL Tube
Loctite® 22423 518™ Eliminator Gasket Flange Sealant, 25 mL Tube
-
BrandLoctite®
-
UPC079340224230
-
Manufacturer Part Number22423
-
CountryUSA
-
Temperature Rating500 deg F Operating/46 to 82 deg F Storage
-
Chemical TypeDimethacrylate
-
ColorRed
-
TypeEliminator
-
VOC Content19.44 g/L
-
Container Size25 mL
-
Adheres toAluminum Flanges, Rigid Iron and Steel
-
Container TypeTube
-
Series518™
-
Curing Time24 hr
-
Specific Gravity1.1
- Forms a flexible, solvent resistant seal that will not tear or decay
- Seals to 300 deg F and fills gaps to 0.05 in with primer
- Recommended for use on rigid iron, steel and aluminum flanges
- Easy disassembly and cleaning
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4KL29 |
-
UNSPSC31201700
-
Package Description1/PK
-
Standards/ApprovalsCFIA Approved|NSF/ANSI 61
-
Catalog
-
SDS
Recently Viewed
Loctite® 22423 518™ Eliminator Gasket Flange Sealant, 25 mL Tube
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
1" -MALE PIPE THREADX1" -MALE PIPE THREAD HYDRAULIC NIPPLE-DAY54041616 >
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
Jones Stephens™ D06125 Dielectric Union, 1/4 in, FNPT x Solder, Forged Steel, Domestic
Jones Stephens™ D06125 Dielectric Union, 1/4 in, FNPT x Solder, Forged Steel, Domestic
