Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
-
BrandLoctite®
-
UPC079340587304
-
Manufacturer Part Number135504
-
CountryUSA|Canada
-
Temperature Rating-75 to 500 deg F
-
Chemical TypeOxime Silicone
-
ColorBlue
-
TypeHigh Performance Low Odor Non-Corrosive Low Volatility
-
VOC Content0.0333
-
Container Size70 mL
-
Adheres toMetal
-
Container TypeTube
-
Series587™
-
Curing Time24 hr at 77 deg F, 30 min at 77 deg F
-
Specific Gravity1.31
- High performance RTV silicone gasket maker is a one-part, formed-in-place, RTV silicone that forms tough, flexible gaskets directly on the flange
- Designed for superior bonding properties to oil-contaminated metals
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4KM22 |
| Grainger | 4KM22 |
-
Alternative Part Number58730
-
UNSPSC31201700
-
Package Description1/PK
-
Standards/ApprovalsCFIA Approved|ABS Approved|NSF P1
-
Catalog
Recently Viewed
Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
Loctite® 234609 598™ High Performance Low Odor Non-Corrosive Gasket Maker, 70 mL Tube
Loctite® 234609 598™ High Performance Low Odor Non-Corrosive Gasket Maker, 70 mL Tube
Top Pick LOCTITE® Hi-Tack Gasket Sealant prevents seizing, correct gasket alignment, easy disassembly. Red-colored, liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky movie. Suitable for 500 deg F (260 deg C). Contains no ozone-depleting compounds. Applications include weather stripping, waterproofing electrical connections.
Loctite® 2096064 Anaerobic Medium Strength Eliminator Gasket Sealant, 50 mL Container Tube Container
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
Loctite® 235479 SI 5920™ 1-Part High Temperature Non-Corrosive Low Volatility RTV Gasket Maker, 300 mL Cartridge
Loctite® 235479 SI 5920™ 1-Part High Temperature Non-Corrosive Low Volatility RTV Gasket Maker, 300 mL Cartridge
