Permatex® 82194 Ultra Grey® Low Odor Non-Flammable Non-Toxic Rigid High Torque Gasket Maker, 3.5 oz Container Carded Tube Container
Permatex® ultra Gray® gasket maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed) and maintains outstanding oil, water-glycol resistance.
-
BrandPermatex®
-
UPC686226821942
-
Manufacturer Part Number82194
-
CountryUSA
-
Temperature Rating-65 to 500 deg F
-
Chemical TypeSilicone
-
ColorGray
-
TypeLow Odor Non-Flammable Non-Toxic Rigid High Torque
-
VOC Content<2%
-
Container Size3.5 oz
-
Adheres toAluminum, Brass, Glass, Iron, Plastic, Steel, Stone and Wood
-
Container TypeCarded Tube
-
SeriesUltra Grey®
-
Curing Time24 hr
-
Specific Gravity1.47
-
Drying Time1 hr
- High load resistance
- Improved oil resistance
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- OEM specified
- Permatex® ultra silicones were developed to meet todays technology changes
- Outstanding oil resistance and joint movement tolerance
- Sensor safe, low odor, non-corrosive
- 8 times more flexible than cork/composite gaskets, 3 times more oil-resistant than conventional silicones
- Temperature range -65 to 500 deg F (-54 to 260 deg C) intermittent, resists auto and shop fluids and vibration
- Non-flammable, non-toxic
- Will not contaminate oxygen sensors or corrode other electronic engine components
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles)
-
Alternative Part Number599BR
-
UNSPSC31201700
-
Package Description12/CS
-
Standards/ApprovalsOEM Specified|OSHA 29 CFR 1910.1200
-
SDS
-
Catalog
-
Specification Sheet
Recently Viewed
Permatex® 82194 Ultra Grey® Low Odor Non-Flammable Non-Toxic Rigid High Torque Gasket Maker, 3.5 oz Container Carded Tube Container
Permatex® ultra Gray® gasket maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed) and maintains outstanding oil, water-glycol resistance.
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket and can be used for pre-cut gaskets.
Loctite® 198819 Flexible Cure Slow Dry Gasket Sealant, 7 oz Tube
DAP 33® glazing is a ready to use glazing compound that may be used for face glazing wood or metal sash. Its knife grade consistency allows for smooth, easy applications and sticks tightly to glass and sash while resisting sagging, shrinking and cracking. This product is designed for both interior and exterior use.
Loctite® 234590 SI 587™ 1-Part High Performance Low Odor Non-Flammable Non-Toxic RTV Gasket Maker, 300 mL Cartridge
LOCTITE® SI 587™ blue high performance RTV silicone gasket maker is a one part, formed-in-place, RTV silicone that forms tough, flexible gaskets directly on the flange. Recommended for sealing all types of flanges including stamped sheet metal
RIDGID® 32112 Roller Pin, For Use With: Model 152/153/205/205-P Tubing Cutter
RIDGID® 32112 Roller Pin, For Use With: Model 152/153/205/205-P Tubing Cutter
