Loctite® 135514 620™ High Temperature Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1599999999999999
LOCTITE® 620™ retaining compound high temperature is recommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushings, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance
-
BrandLoctite®
-
UPC079340620407
-
Manufacturer Part Number135514
-
CountryUSA|Canada
-
Temperature Rating-65 to 450 deg F
-
Flash Point199.94 deg F
-
FormLiquid
-
ColorGreen
-
TypeHigh Temperature
-
CompositionDimethacrylate ester, Resin, Hydroxyalkyl methacrylate, Cumene hydroperoxide, Silica, amorphous, fumed, crystal-free, Polyglycol Dimethacrylate, Cumene, 1-Acetyl-2-phenylhydrazine
-
VOC Content2.24 g/L
-
Viscosity Rating8500 cPs
-
Container Size50 mL
-
Container TypeBottle
-
Application Time1 hr
-
Series620™
-
Curing Time24 hr
-
Shear Strength3800 psi
-
Specific Gravity1.16
-
Odor/ScentMild
- A high viscosity liquid retaining compound
- Locks and secures metal cylindrical assemblies up to 0.015 in diameter clearance
- Prevents metal fretting and corrosion
- Seals against leakage
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4KM33 |
| Grainger | 4KM33 |
| Grainger | 4KM33 |
-
Alternative Part Number62040
-
UNSPSC31201600
-
Package Description1/PK
-
Standards/ApprovalsABS Approved|CFIA Listed
Recently Viewed
Loctite® 135514 620™ High Temperature Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1599999999999999
LOCTITE® 620™ retaining compound high temperature is recommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushings, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance
The D1508-1 is an 8 ft one section aluminum straight ladder with a duty rating of 300 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum TRACTION-TRED® D-rungs are slip resistant. The rugged shoe rests flat or is held in spur position with the SHU-LOK® feature for use on hard or penetrable surfaces.
All Reed cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
MORSE® 32321 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/8-9 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
#7 X 1-1/2" Round Head Slotted Wood Screw
Ingersoll Rand 231HA 231 Super Duty Air Impact Wrench, 1/2 in Drive, 550 ft-lb Torque Rating, 4.2 cfm Air Flow, 7.3 in OAL
The 231HA Series is the ideal impact wrench for any job you take it to, from facility maintenance and industrial work to vehicle repair and tire work. Tough and durable with a powerful vane motor, this impact wrench won’t let you down.
