Loctite GRAY FIXMASTER STEEL LIQUID 1-LB LOC 235617
Loctite® Fixmaster® 235617 3472™ 2-Part Pourable Steel Liquid, 1 lb Kit, Blue/Gray, 6 hr Curing
-
BrandLoctite®
-
UPC079340974838
-
Manufacturer Part Number235617
-
CountryUSA
-
Temperature Range225 deg F
-
For Use OnMetal and Steel
-
ColorBlue/Gray
-
Type2-Part Pourable
-
CompositionPart A: Diiron Trioxide, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Manganese, Gamma-Glycidoxypropyl Trimethoxysilane; Part B: Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diethylenetriamine, 4,4'-Isopropylidenediphenol, Tetraethylene Pentamine
-
Mixing Ratio4:1 By Volume/9.5:1 By Weight
-
VOC Content<10 g/L
-
Container Size1 lb
-
Container TypeKit
-
Series3472™
-
Curing Time6 hr
-
Work Life25 min
-
Base TypeEpoxy
- Steel liquid is a pourable and self-leveling, steel-filled epoxy
- Ideal for casting or making molds
- Works well to fill hard-to-reach areas
- Can be machined when cured
- D 86 shore hardness
- Part A: epoxy resin, part B: epoxy hardener
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5TT82 |
-
Alternative Part Number97483
-
UNSPSC31201601
-
Package Description1/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200, GHS|ASTM D4060/D790/F 433/E 1640
-
SDS
Recently Viewed
Loctite® Fixmaster® 235617 3472™ 2-Part Pourable Steel Liquid, 1 lb Kit, Blue/Gray, 6 hr Curing
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
MORSE® 43664 1898 Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/5/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-7/16 in OAL, Bright
GP® 2023M Standard Length Socket, 1/2 in, 23 mm Hex Socket, 6 Points
Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.
MORSE® 59541 5970 Premium Open Coated Disc Roll, Radius End, Cylindrical Head, 1/4 in Dia Head, 1 in L of Cut, 2 in OAL, Double Cut
